iPhone 16 Taptic Engine Installation

ID: 181000

Description:

Steps:

1. Place the Taptic Engine into its recess in the frame.

2. Use a Phillips screwdriver to install the two screws securing the Taptic Engine:
3. One 2.2 mm‑long screw
4. One 1.7 mm‑long screw

5. Use the flat end of a spudger to connect the Taptic Engine press connector.

6. Use tweezers or your fingers to place the bracket over the Taptic Engine press connector.

7. Use a Phillips screwdriver to install the two 1.8 mm‑long screws securing the Taptic Engine bracket.