Canon EOS Rebel T7i I/F Terminal Cover Replacement

ID: 181030

Description: Removing the I/F terminal cover is useful if...

Steps:

1. Before beginning, remove the battery from the camera.
2. Underneath the two I/F terminal caps, remove the following screws:
3. Three M1.7x5.5mm JIS #000 screws
4. Using a plastic opening pick, peel off the front name plate.
5. Underneath where the name plate was, remove the following screw:
6. One M1.7x5.5mm Phillips #000 screw

7. Using a plastic opening pick, pry up on the right side of the I/F terminal cover.
8. Pull off the I/F terminal cover from the camera.