iPhone 16 Pro Max Front Camera Installation

ID: 181167

Description: Installation steps for the front camera module...

Steps:

1. Lay the front camera assembly in its recess.
2. Gently tuck the camera flex cables into the gap between the rear camera assembly and the earpiece speaker assembly.

3. Use your finger or a spudger to press and connect the two camera connectors onto the logic board.
4. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

5. Use your finger or a spudger to press and connect the earpiece speaker and the mmWave antenna connectors onto the logic board.