iPhone 16 Pro Max Rear Camera Installation
ID: 181171
Description: Installation steps for the rear camera in the...
Steps:
- Lay the rear camera assembly in its recess.
- Use a Phillips screwdriver to install the two 2.9 mm‑long screws securing the rear camera assembly.
- Use your finger or a spudger to press and connect the two camera connectors onto the logic board.
- To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Don't press down in the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
