iPhone 16 Pro Max Charge Port Installation

ID: 181194

Description: Installation steps for the charge port in the...

Steps:

  1. Make sure the two black prongs are standing straight up. If they were bent when you removed the charge port, use the point of a spudger to carefully straighten them.
    2. Step image
  2. Angle the bottom edge of the charge port into its recess and press the charge port in place.
    3. Step image Step image
  3. Use a pentalobe P2 driver to temporarily install the two external pentalobe screws.
  4. This pulls the loose charge port into alignment.
    5. Step image
  5. Use a Phillips screwdriver to install the two 3.3 mm‑long screws securing the charge port to the frame.
  6. Be careful not to press the screwdriver against the battery.
    7. Step image Step image Step image
  7. Use a pentalobe P2 driver to remove the two temporary pentalobe screws.
  8. If you forget to remove these screws, the back glass won't install properly.
    9. Step image
Back