2012-2018 Toyota Corolla LE Headlights Replacement

ID: 181636

Description: Broken or dead headlights are a common issue...

Steps:

  1. Pull the hood release lever under the dashboard.
  2. Open and prop the hood open.
    3. Step image
  3. The back of the headlight assembly is inside the engine bay.
  4. The low-beta, bulb (H11) is positioned toward the fender.
  5. The high-beam (9005) is closer to the center of the car.
    6. Step image
  6. Press the release tab and disconnect the wiring harness from the back of the bulb.
  7. Grip the build’s base and twist it counterclockwise about a quarter turn.
  8. Carefully pull the bulb straight out of the headlight housing.
    9. Step image
  9. Caution: Do not touch the glass part of the new bulb with your fingers. Skin oils can shorten the bulb’s lifespan. Be sure to wear gloves, especially when handling the replacement bulb.
  10. Hold the new bulb by its base.
  11. To secure, insert the bulb into the socket and turn it clockwise until firmly tightened.
  12. Reconnect the wiring harness by pushing the connector back onto the bulb until it clicks.
    13. Step image
  13. Turn on headlights to confirm they work.
  14. If the bulb doesn’t light up:
  15. Ensure the bulb is properly seated.
  16. Check that the harness is securely attached.
    17. Step image Step image
Back