Klipsch Cinema 600 Power Supply Replacement

ID: 182080

Description: Unit wouldn't power on anymore after 4 years of...

Steps:

  1. Remove 19 TR15 Torx screws from the rear of the unit and
  2. Remove 5 TR15 Torx screws from the bottom.
  3. Remove 2 2.5" Allen Screws
    4. Step image Step image Step image
  4. Using Pry Bar, Separate the rear panel from the main housing.
    5. Step image
  5. Remove the Yellow Glue from the underside to remove the power supply from the right side of the rear panel.
    6. Step image Step image
  6. From Here you can either Replace the Power Supply, using compatible components from amazon, or you can try and replace capacitors and see if that fixes the issue.
Back