Acer Chromebook CB0311-1H-C1MX Touch Pad Replacement

ID: 182437

Description: This guide will demonstrate the process of...

Steps:

1. Using a JIS #1 screwdriver, remove eleven 6.6 mm screws from the back cover.

2. Beginning at the hinges, use an iFixit Opening Tool to pry open the back case.
3. Continue using the iFixit Opening Tool around the entire edge of the case.

4. Using a JIS #1 screwdriver, remove all four 4.8 mm screws holding the battery in place.

5. Gently push on either side of the silver connector so that it no longer covers the battery cable.
6. Disconnect the battery cable by pulling it straight out.
7. This component is called the Flat Topped Connector.

8. Lift and remove the battery from the laptop.

9. Remove the black electrical tape over the cable connecting the touchpad to the motherboard.

10. Using a spudger, lift the hinged white tab holding the cable to the touchpad.
11. Using your fingers or the spudger, disconnect the cable from the touchpad.

12. Remove all three 2.3mm screws with a JIS #00 screwdriver.
13. The screws may be covered by tape. Remove the tape to reveal the screws.

14. Peel back or remove the two pieces of grey tape holding the touchpad in place.

15. Gently lift the touchpad up and out.