Waterpik Cordless Advanced 2.0 WP-580 Nozzle O-Ring Replacement

ID: 185231

Description: In the process of caring for and cleaning your...

Steps:

1. Depress the tip eject button and remove the tip.
2. Use an opening tool to pry off the tip rotator.
3. Avoid excessive force to prevent damaging the tip rotator.

4. Remove the four Phillips screws beneath the tip rotator.
5. Remove the eject button assembly.

6. Use a Phillips #0 screwdriver to remove the two screws beneath the eject button assembly.
7. Remove the water reservoir.
8. Remove the two Phillips #0 screws toward the bottom of the device.

9. Insert the flat end of a spudger into the seam between the front and rear case and gently begin to pry the two halves apart.
10. Disconnect the hose from the right side of the device and fully separate the two halves.

11. Remove the O-Ring at the top of the assembly.