Waterpik Cordless Advanced 2.0 WP-580 Water Hose O-Ring Replacement

ID: 185233

Description: While caring and cleaning your device, the...

Steps:

1. Depress the tip eject button and remove the tip.
2. Use an opening tool to pry off the tip rotator.
3. Avoid excessive force to prevent damaging the tip rotator.

4. Remove the four Phillips screws beneath the tip rotator.
5. Remove the eject button assembly.

6. Use a Phillips #0 screwdriver to remove the two screws beneath the eject button assembly.
7. Remove the water reservoir and remove the two Phillips #0 screws toward the bottom of the device.

8. Insert the flat end of a spudger into the seam between the front and rear case and gently begin to pry the two halves of the case apart.
9. Disconnect the hose from the right side of the device and fully separate the two halves of the case apart.

10. Use a Phillips #0 screwdriver to remove the two screws securing the hose outtake.
11. Remove the hose.

12. Remove the O-ring from the top of the hose.