Bissell CleanView Compact 3508 Top/Bottom Replacement

ID: 185349

Description: This guide for the Bissell CleanView Compact...

Steps:

1. With the vacuum in an upright position, press the latch on the rear of the spine to remove the handle from the vacuum.

2. Use a Phillips #2 screwdriver to remove the five 20.7 mm screws on the underside of the brush roll cover.

3. Use a pry tool or flathead screwdriver to disengage the two retaining clips securing the brush roll cover.
4. Remove the brush roll cover.

5. Disconnect the main black hose from its lower attachment point.

6. Use a Phillips #2 screwdriver to remove the two 20.7 mm screws from the lower hose attachment point.

7. Use a Phillips #2 screwdriver to remove the four 20.7 mm screws on the upper cover plates.
8. Remove the two upper cover plates.

9. Gently pull the top half up and to the side away from the drive shaft to separate both halves.
10. Pull the belt through the socket, and remove the belt from the drive shaft.