HP 14-dq5043cl RAM Replacement

ID: 185515

Description: Is your device failing to boot, frequently...

Steps:

  1. For your safety, unplug all peripheries, discharge the battery below 25%, and power down your device before beginning disassembly.
  2. Remove the two rubber feet on the lower case.
  3. If you intend to reuse the rubber feet: Use a hairdryer or iOpener to lightly heat the feet to loosen the adhesive that secures them prior to removal. Take care not to stretch out the rubber.
    4. Step image Step image
  4. Remove the six M2XL6 Phillips screws that secure the lower case.
    5. Step image
  5. Insert a nylon spudger into the seam between the lower case and chassis.
  6. Pry around the entire perimeter until the lower case fully releases.
  7. Remove the lower case.
    8. Step image Step image Step image
  8. Two clips secure each RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.
  9. When released, the RAM modules will pop up at a slight angle.
  10. Slide the RAM module straight out to remove it.
    11. Step image Step image Step image
Back