HP 14-dq5043cl Fan Replacement

ID: 185516

Description: Is your laptop overheating, are you struggling...

Steps:

1. For your safety, unplug all peripheries, discharge the battery below 25%, and power down your device before beginning disassembly.
2. Remove the two rubber feet on the lower case.
3. If you intend to reuse the rubber feet: Use a hairdryer or iOpener to lightly heat the feet to loosen the adhesive that secures them prior to removal. Take care not to stretch out the rubber.

4. Remove the six M2XL6 Phillips screws that secure the lower case.

5. Insert a nylon spudger into the seam between the lower case and chassis.
6. Pry around the entire perimeter until the lower case fully releases.
7. Remove the lower case.

8. Remove the three M2xL3 Phillips screws that secure the fan.

9. Gently disconnect the fan connector from its motherboard socket.
10. Lift the fan up and out.