JBL Go 3 Battery Replacement

ID: 185629

Description: If your JBL Go 3 battery stops holding a charge...

Steps:

1. Use a Jimmy or opening pick to gently lift one corner of the fabric mesh, then carefully remove the entire fabric and shell.
2. Insert the Jimmy along the seam and gently pry open the housing.
3. Work your way around the speaker, unclipping the internal latches as you go.

4. Around the rubber circle, you’ll find four small screws.
5. Use a screwdriver to remove the screws.
6. Then gently use a Jimmy to open the speaker’s housing.

7. Unscrew the motherboard to access the battery.
8. Locate the battery, it’s usually wrapped in black or silver and connected to the mainboard by a small cable.
9. Carefully disconnect the battery connector from the circuit board.
10. Remove the old battery, replace it with the new one and reconnect the cable securely.
11. Close the housing, screw everything back in place, and reattach the fabric mesh.