Logitech Zone Vibe 100 Motherboard Replacement

ID: 185701

Description:

Steps:

1. Pry open both the right earpad and left earpad carefully with your hands.

2. On the left speaker housing, remove the four 4.5 mm screws with a T3 Torx screwdriver.
3. Remove the single 3.3 mm Phillips #00 screw.

4. Remove plastic cover from the microphone hinge with your hands and clean any debris with a microfiber cloth.

5. Desolder the microphone connection from the PCB.
6. Remove the microphone.

7. Remove the two 4.5 mm Phillips screws that secure the motherboard.

8. Carefully lift the motherboard out.