Sony ULT WEAR Driver Replacement

ID: 185744

Description: The Sony ULT Wear may be having issues with the...

Steps:

  1. Remove the affected driver's ear pad from the can to reveal 8 8.2 mm screws.
  2. If you're replacing the I/O board, remove the left ear pad.
  3. Unscrew all eight Phillips #00 screws from the driver housing.
    4. Step image Step image
  4. Flip the can upside down, so the top of the PCB is facing upwards.
  5. Flip up the three black ZIF locking flaps and disconnect each of the three ribbon cables with tweezers.
  6. Grip and pull the white connector directly out of its socket.
    7. Step image Step image Step image
  7. Safely remove the driver from the driver diaphragm.
    8. Step image
Back