Sony MVC-FD200 Back Cover Replacement

ID: 185899

Description: This guide provides a step-by-step approach to...

Steps:

  1. Using your finger, slide the tab on the battery door up to release the battery latch.
    2. Step image
  2. Lift the battery door to reveal the battery compartment.
  3. Push the gray lever to the left side to remove the battery.
  4. If any other repairs are needed, make sure to carefully remove the battery to avoid any electric shock or short circuits during repairs.
    5. Step image
  5. Turn the camera so that the top is facing down towards the table.
  6. Using the Phillips #00 screwdriver, remove all 2.0 mm screws with the arrows facing towards them.
    7. Step image
  7. Flip the camera on both sides and remove the rest of the screws with arrows facing towards them.
  8. Remove the 2.0 mm screws with the Phillips #00 screwdriver for both sides of the camera.
    9. Step image Step image
Back