Razer BlackWidow V3 Tenkeyless LED Replacement

ID: 185993

Description: If the LEDs on your Razer BlackWidow V3...

Steps:

1. Before you start, unplug the keyboard from your computer to prevent accidental damage.
2. Use a keycap puller to all keycaps.

3. Gently remove the 7.85 mm screws that secure the case with a Phillips #0 screwdriver.
4. Avoid applying excessive force.

5. Carefully separate the backplate from the main keyboard body.
6. A plastic opening tool can be helpful to gently pry the pieces apart if needed.
7. Be patient and work slowly to avoid breaking any clips or the usb-connector.

8. Gently pull out the cable holding the usb connector using your hand.
9. Ensure the cable is pulled straight back to prevent the usb-connector snapping.

10. Use a soldering iron to heat the four solder points securing the LED to the board, then apply a solder wick to absorb and remove the melted solder.
11. The soldering process involves high heat—handle the soldering iron carefully to avoid burns or damage to the circuit board.