why! V540TU USB Board Replacement

ID: 186266

Description: This guide shows you how to replace the USB...

Steps:

1. Unscrew the screws circled in red.
2. Insert the opening pick into the gap and slide it all the way around.

3. Unclip the housing at the corners.
4. Lift the cover.

5. Unplug the cable.

6. Unscrew the screws circled in red and remove the battery.

7. Disconnect the cable.
8. Remove the adhesive.
9. Remove the speaker.

10. Unscrew the screws circled in red.
11. Remove the adhesive from the first cable.
12. Remove the cable.

13. Remove the second adhesive.
14. Remove the second cable.
15. Lift the heat sink.

16. Unscrew the screws circled in red.
17. Gently lift the board and flip it over.
18. Unclip and remove the connector.