Euhomy IM-06D Fan Replacement

ID: 186477

Description: This guide is for the Euhomy IM-06D icemaker....

Steps:

1. Rotate the device so that the screws on the bottom are visible.
2. Remove the two 15 mm Phillips screws.
3. Remove the two 10 mm Phillips screws.

4. Remove the back panel from the device.

5. Remove the two 10 mm Phillips screws that secure the fan.

6. Remove the cover plate.

7. Snip the zip tie holding the wires together.
8. Unplug the wire from the board.
9. Remove the fan from the device.