Euhomy IM-06D Compressor Relay Replacement

ID: 186478

Description: This guide is for the Euhomy IM-06D icemaker....

Steps:

1. Rotate the device so that the screws on the bottom are visible.
2. Remove the two 15 mm Phillips screws.
3. Remove the two 10 mm Phillips screws.

4. Remove the back panel from the device.

5. Remove the two 10 mm Phillips screws that secure the fan.

6. Remove the cover plate.

7. Snip the zip tie holding the wires together.
8. Unplug the wire from the board.
9. Remove the fan from the device.

10. Locate the black box under the green ground cable and find the silver clip running across the back of it.
11. Use a pry tool remove the clip.
12. Remove the box.

13. Locate the white wire and black relay.
14. Using your hands pull the wire and relay out of the compressor.
15. Once the relay and white wire have been removed you're ready to replace it with your new part.