Samsung Galaxy Tab 10.1 Rear Panel Replacement

ID: 18737

Description: In this guide, you will learn how to remove the...

Steps:

1. Place the bottom of the tablet towards you.
2. Remove the 4.1mm screws near the charge port with a Tri-Wing screwdriver.
3. If there are plastic tabs covering these screws, use pointed tweezers to pry the tabs out.
4. On model GT-P7500, this step is omitted, as that model doesn't have these 2 screws.

5. Start in the middle of the left side and insert a plastic opening tool between the rear panel and the front panel assembly.
6. Carefully run the plastic opening tool along the left and top edge to pry the rear panel away from the rest of the device.
7. Place opening picks along the side you have already pried open to keep the back panel detached from the rest of the device.
8. Be sure to work carefully, as prying too firmly can crack the screen.

9. Using the plastic opening tools, continue to carefully run along the right and bottom edge, and then lift the screen from the back panel.