Canon ImageCLASS MF4350d Scanner Belt Replacement

ID: 18773

Description: If you find that your scanner light does not...

Steps:

1. If at any point you see glass that seems cracked or broken, handle with care. Broken glass is sharp and can cause serious damage.
2. Lift up the lid. Then be sure to examine the glass. If there are any cracks or broken fragments handle with extreme care.

3. Locate the black and white hinges.
4. Gently lift out the black and white hinges.

5. Next, locate and remove the four 10mm screws.

6. Gently, pry off the top plate, starting from the back of the printer.

7. After you have taken off the plate, check to make sure that there is no broken glass. If there is broken glass handle it with gloves. Broken glass, if handled improperly, can cause physical injury.

8. Remove the black component by gently pulling it up from the black scanner belt

9. Press down on the white release and force it in toward the spring as shown. While you do this, pull the scanner belt out of the track.
10. Take a new belt and put it in the same way that you took it out.