Les Paul Wireless Guitar Battery Pack Replacement

ID: 19139

Description: This guide will show how to replace the...

Steps:

  1. Remove batteries
    2. Step image
  2. Remove void warranty sticker
  3. The sticker is covering a torx screw
    4. Step image Step image
  4. Unscrew the 11 screws securing the back of the body using a T10 Torx screwdriver. Each screw is 1 cm long.
  5. Push level, this will detach the back of the guitar from the front.
  6. Carefully remove the back of the body
  7. The battery pack cord is attached to both sides of the guitar, be careful not to tear it apart.
  8. The neck connector may be stuck to the back so be sure to detach it before fully pulling
    9. Step image Step image Step image
  9. Gently move the capacitor around until it breaks off
    10. Step image Step image
  10. Solder on the new capacitor.
    11. Step image
Back