(New) iPhone 15 Battery Installation

ID: 191774

Description:

Steps:

1. If there's any large pieces of residual battery adhesive remaining, use a pair of tweezers to peel them off the iPhone frame.
2. Use coffee filters or a lint‑free cloth and high‑concentration (>90%) isopropyl alcohol to wipe off any remaining battery adhesive residue from the iPhone frame.

3. If your replacement battery comes with a plastic sleeve, peel it off and remove it.

4. If your battery doesn't come with pre‑installed adhesive, follow this guide to install it, then come back to this guide to finish reassembly.
5. Peel the liner off the battery adhesive.

6. Hold the battery over its place in the iPhone and connect its press connector.
7. With the battery connected, lower it into place and use your fingers to press it into the frame.
8. After the battery is set, use the tip of a spudger to pry up and disconnect the battery cable press connector.