(New) iPhone 15 Logic Board Installation

ID: 191782

Description:

Steps:

1. Slide the logic board into its slot in the frame, making sure the nine press connectors are above the logic board.

2. Use your standoff driver to install the five standoff screws securing the logic board:
3. One 2.9 mm‑long screw
4. One 3.9 mm‑long screw
5. Three 3.5 mm‑long screws
6. If you don't have a standoff driver, you may use a thin flathead driver—but be careful not to strip the shallow notches in the screw heads.

7. Use your spudger or your fingers to connect the eight press connectors:
8. The power button
9. The volume button
10. The rear cameras and antenna (three connectors in total)
11. The eSIM
12. The Taptic Engine
13. The charging port
14. Don't connect the battery press connector yet.