HP 17-p051no Basic Disassembly

ID: 192918

Description: Before upgrading memory, hard drive or some...

Steps:

1. Put the laptop upside down and remove the battery by pulling the right latch outward.
2. Raise the battery upwards.

3. Remove the screws that are shown in the picture with a Phillips #0 screwdriver.

4. Remove the paw with iFixit Opening Picks.
5. Remove the screw with a Phillips #0 screwdriver.
6. Do the same operation to the right corner.

7. Remove the corner piece with iFixit Opening Picks.
8. Remove the screw as shown in the picture.
9. Do the same operation to the right corner.

10. Pull the optical disk drive (ODD) out with fingers.
11. Remove the screws as shown in the picture.

12. Remove the keyboard/touchpad tile with iFixit Opening Picks and fingers.
13. Remove the cabels as shown in the picture from the motherboard.
14. Now you can start the replacement or cleaning operation.