Canon EOS 70D Interface Cover Replacement

ID: 193580

Description: This guide will show you how to replace the...

Steps:

  1. Before beginning, remove the battery and SD card from the camera.
  2. Using your thumbs, push up on the eyepiece to remove it.
  3. Remove the battery door.
  4. Open the battery door to about a 35° angle.
  5. Pull the battery door straight outwards.
    6. Step image Step image
  6. Using a plastic spudger tool, peel off the rubber grip on the left side of the camera.
  7. Underneath where the rubber grip was, remove the following screws:
  8. Three M1.7x5.5mm Phillips #000 screws
  9. Pry off the plastic interface cover.
  10. Use a plastic opening tool if a fingernail doesn't work.
    11. Step image Step image Step image
Back