Casio FX-991CW Battery Replacement

ID: 194227

Description: Casio Advanced Scientific FX-991CW Battery...

Steps:

1. First, take the protective cover off the calculator.
2. Then, turn the calculator over.
3. Remove the Philips screw that holds the battery cover in place in the top-right corner.
4. Then lift the cover off by lifting the right side of the cover up, and slide it out.

5. Take a pointy, flat tool, like a flathead screwdriver, to pry the battery out of the compartment.

6. Insert the new battery into the calculator by sliding it into place, then pushing it down, to ensure a good connection.

7. Slide the battery cover into place.
8. Then install the screw.
9. Tighten the screw.
10. NOTE: BELOW THIS GUIDE, THERE IS A NOTE THAT SAYS "TO REASSEMBLE THIS DEVICE, FOLLOW THESE DIRECTIONS IN REVERSE ORDER." DO NOT FOLLOW THAT STEP, AS THIS GUIDE IS COMPLETE!