Turtle Beach Stealth Ultra Back Buttons Replacement

ID: 199154

Description: The back buttons, sometimes known as paddle...

Steps:

1. Use tweezers to pull out rubber pieces in front of the screws.

2. Remove the 10 mm screws using a Phillips #00 screwdriver.

3. Remove the sticker on the back of the plate.
4. Remove the 10 mm screws from the back plate using a Phillips #00 screwdriver.

5. Use an iFixit opening tool to pry the front button plate and analog stick plate off.
6. Use a Phillips #00 screwdriver to remove the screws from the front plate on both sides of the controller.
7. Be cautious not to break the LCD screen while you move the opening tool around.

8. Use an opening tool to detach the front plate from the back.
9. You may need to work the opening tool all the way around the seam between the two plates.

10. Remove the four 10 mm screws from the back plate using a Phillips #00 screwdriver.

11. Pull the back buttons out from the backplate.