Garmin Drive 50 LM Case Removal

ID: 199429

Description: Follow this guide in order to remove the front...

Steps:

1. Use a T5 Torx screwdriver to remove the four 9 mm-long screws securing the case.

2. Insert an opening tool into the seam between the case and the chassis.
3. Pry around the perimeter of the device until the case releases.
4. It is recommended to work along the length of the device first, then the width.

5. Once open, set the screen down at an offset to be able to see the yellow cable.

6. With tweezers, flip up the brown locking flap to release the ribbon cable.
7. Gently disconnect the yellow ribbon cable.