Framework Laptop 16 Expansion Bay Shell Fan Board Installation

ID: 199438

Description:

Steps:

1. Place the board straight on its alignment pegs on Expansion Bay Shell.

2. Use your Framework Screwdriver to install the two 3.6 mm‑long screws securing the Expansion Bay Shell Fan Board.

3. Use your fingers to grip the brown pull tab and slide the left fan cable straight into its socket.
4. Use the flat end of your Framework Screwdriver, or a clean fingernail, to press down the locking tab on the left fan ZIF connector.

5. Repeat the previous step to connect the right fan cable.