HP ProBook x360 11 G5 EE I/O Board Replacement

ID: 199485

Description: In this guide, we will show you an step by step...

Steps:

1. Remove the 4.1 mm screws with a T5 Torx screwdriver.
2. Remove the 4.1 mm screws using a JIS #0 screwdriver.

3. Use an opening pick to pry the corners of the keyboard deck.

4. Use an opening pick or opening tool to pry around the sides of the keyboard assembly.

5. Lift the keyboard assembly to expose two ribbon cables.
6. Lift the two plastic tabs that hold the cables in place on the motherboard
7. Slide the ribbon cables out of each connector.

8. Remove the keyboard assembly from the rest of the computer.

9. Lift the two locking flaps securing the two ribbon cables to the I/O board.
10. Disconnect the two ribbon cables.
11. Use a J1 screwdriver to remove the two screws securing the board.

12. Remove the IO board.