Framework Laptop 16 Bottom Cover Installation

ID: 199509

Description:

Steps:

1. The replacement Bottom Cover comes with pre-installed screws for the hinge, Mainboard, and the speakers. During reassembly, use those screws to replace your old ones.

2. If you have a secondary SSD installed, remove the blue liner on the thermal pad.

3. Place the Mainboard into the laptop and onto its alignment pegs.

4. Use your Framework Screwdriver to install the six 2.0 mm‑long T5 Torx screws securing the Mainboard.

5. Place the Top Cover over Bottom Top Cover, making sure the hinges are slotted into their alignment pegs.

6. While supporting the Top Cover with one hand, use your Framework Screwdriver to install the four 3.9 mm‑long screws on each hinge connected to the Bottom Cover (8 total).