Lenovo ThinkPad E15 Gen 2 RAM Replacement

ID: 199517

Description: Use this guide to replace or upgrade a broken...

Steps:

1. Use a Phillips #1 screwdriver to loosen the eight captive screws securing the lower case.
2. The screws are captive and should not have the ability to be taken out.

3. Insert an opening pick into the seam between the lower case and chassis.
4. Slide the pick around the entire perimeter until the lower case fully releases.

5. Remove the lower case.
6. When reassembling, place the lower case on top of all the clips and push down around the edges until all the clips are engaged.

7. Pull the battery connector directly out of its socket.

8. Unscrew the 2.4 mm-long Phillips #1 screw securing the RAM shield.
9. Remove the shield.

10. Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.

11. Pull the RAM module directly out of its socket.