Lenovo ThinkPad E15 Gen 2 SSD Replacement

ID: 199519

Description: If you're Lenovo E15 Gen 2 (Model Numbers 20T8,...

Steps:

1. Use a Phillips #1 screwdriver to loosen the eight captive screws securing the lower case.
2. The screws are captive and should not have the ability to be taken out.

3. Insert an opening pick into the seam between the lower case and chassis.
4. Slide the pick around the entire perimeter until the lower case fully releases.

5. Remove the lower case.
6. When reassembling, place the lower case on top of all the clips and push down around the edges until all the clips are engaged.

7. Pull the battery connector directly out of its socket.

8. Locate the SSD.
9. Unscrew the single 3.5 mm-long screw securing the SSD with a Philips #1 screwdriver.

10. Remove the SSD.