Turtle Beach Recon Cloud Back Casing Replacement

ID: 199602

Description: If you need to access the inner components or...

Steps:

1. Use a Phillips #00 screwdriver to remove 7 screws from the back casing.
2. The 2 inner screws are hidden under the Turtle Beach sticker.
3. The two screws at the bottom of the grips are countersunk, so you may need a 1/4" extender if your driver doesn’t fit.

4. Use the iFixit opening tool to wedge it between the inner grip and the casing to pry it off.
5. Do the same to the other inner grip.
6. Do not take off the outer grips as they have wiring attached to them.

7. Lift off the back casing.