Alcatel Go Flip 3 Charging Port Replacement

ID: 199715

Description: This guide shows how to replace the charging...

Steps:

1. Place a fingernail or opening tool into the notch on the back panel of the phone.
2. Pry upwards to remove the back panel.

3. Remove the battery by lifting it up from the small indent.

4. Remove the nine 1 mm screws from the midframe using a Phillips #00 screwdriver.

5. Use a spudger to pry the midframe away from the phone.

6. Use a spudger to disconnect the video cable from the motherboard.
7. Make sure not to damage the video cable when disconnecting it from the motherboard. Hold it up correctly.

8. Use a spudger to pry the motherboard out of the phone.

9. Desolder the charging port from the motherboard.