Framework Laptop 16 Webcam Cable Removal

ID: 199815

Description:

Steps:

1. Grip the Hall Effect cable connector by its black pull tab and slide it straight out of its socket.

2. While supporting the Top Cover with one hand, use the flat end of your Framework Screwdriver, or a clean fingernail, to lift up the locking tab on the webcam ZIF connector.

3. Slide the flat end of your Framework Screwdriver under the webcam cable, near the ZIF connector, and twist to slide the connector out of its socket.
4. Alternatively, you can use your fingers to slide out the cable.

5. Use your fingers to peel off the flat portion of the webcam cable from its adhesive near the top edge of the Top Cover.

6. Continue peeling to separate the cable from the adhesive near the center of the Top Cover.

7. Use your fingers to peel off the thick portion of the webcam cable from its adhesive near the bottom edge of the Top Cover.

8. Grip the webcam cable near its bend and peel it off the Top Cover.

9. At this point, the webcam cable should be free and you can remove it.