Framework Laptop 16 Graphics Module Removal

ID: 199978

Description: Use this guide to remove the expansion bay in...

Steps:

1. Lift the interposer door by its black pull tab and let it rest upright.

2. Use your Framework Screwdriver to loosen the four captive T5 Torx screws securing the interposer.

3. Lift the interposer by its pull tab and remove it.

4. Use your Framework Screwdriver to loosen the two captive T5 Torx screws securing the Graphics Module.
5. Close the interposer door before continuing.

6. Close your laptop and flip it over.
7. Slide the Graphics Module out of the laptop and remove it.
8. The module should slide out easily. If you feel any resistance, check that the screws holding it in place are fully loosened.