Dell Precision 3510 Power Connector Port Replacement

ID: 200085

Description: This guide will teach you how to disassemble...

Steps:

1. Flip the computer over so that you are looking at the bottom.
2. Use a Phillips #000 screwdriver to remove the eight 6.5 mm screws from the base cover.

3. Use the opening tool to carefully pry the base cover from the computer.
4. Remove the base cover from the laptop.

5. Using a Phillips #000 screwdriver, remove the two 5.5 mm screws from the battery.

6. Gently unplug the cable connected to the top of the battery.
7. Remove the battery from the laptop.

8. Use a Phillips #000 screwdriver to remove the single 3 mm screw from the metal bracket that secures the power port.

9. Lift the metal bracket and gently remove the power connector port.
10. Unplug the power connector port cable from the system board.