XBOX Controller S Trigger Replacement

ID: 200245

Description: If the trigger on your Xbox Controller S is...

Steps:

1. Remove the seven 9.4 mm screws on the back of the controller using a Phillips #00 screwdriver.
2. One screw is hidden behind the sticker on the back of the controller. Peel that sticker back and remove that screw as well.

3. Keep the controller facing down to prevent components from falling out.
4. Remove the back shell.
5. Flip the controller over and remove the front shell.

6. Carefully remove the motherboard from the shell.

7. Desolder the three attachment points for the trigger, then unclip the trigger from the circuit board.
8. Clip in the new replacement trigger and solder the three attachment points.