Alcatel Go Flip 4 Camera Replacement

ID: 200268

Description: Is the camera not showing anything, taking...

Steps:

1. Heat the screen cover with an iOpener to soften the adhesive holding it to the display frame.

2. Insert a Jimmy under the screen cover to pry it open.

3. Use plastic opening picks to separate the adhesive.
4. Add more heat as needed.

5. Remove the plastic screen cover and set it aside.

6. Remove the four 3.5 mm screws holding the rear cover in place using a JIS #00 screwdriver.

7. Starting at the hinge side, insert the Jimmy between the rear cover and the display's frame.
8. Continue down the side of the phone, releasing clips as you go.

9. Work your way across the bottom and up the other side to separate the rear cover from the rest of the phone.

10. Disconnect the camera flex cable with the spudger.

11. Remove the camera from the display using tweezers.