Remington WPG4035 Trimmer - Dissasembly

ID: 204405

Description: If the charger-contact is defect (= no charging...

Steps:

1. Twist off the head

2. use a stub knife (like the stub side of a butter knife)

3. Carefully lever off the knob with a small knife.
4. To reassemble: This small hook should be in that hole.
5. Take care, to no lose this little part.

6. use a stub knife (like the stub side of a butter knife). Be careful.
7. Your hear a "blob" sound, when a locking is open.
8. There are two hocks on each side, which has hold the outer cap. These may help you to lever up. But stay careful.
9. An image of the two inner locks.

10. use a pliers to pull it out
11. Do not lose this little plastic part.

12. just image, and some technical data (incl. power supply polarity).