Google Pixel 10 Pro Fold 5G mmWave Antenna Installation

ID: 204886

Description:

Steps:

1. Place the 5G mmWave antenna into its slot in the frame.

2. Use a spudger to press the antenna down into its thermal pad so it sits flat in the frame.

3. Slide the clip at the top right of the antenna bracket under the frame.
4. Press the bracket flat to the logic board and align its screw holes.

5. While pressing the bracket against the logic board, slide the top left clip under the frame.

6. Use a Torx Plus 3IP driver to install the three screws securing the antenna bracket:
7. One 1.9 mm‑long screw
8. Two 2.8 mm‑long screws