2014-Present Kia Sedona Cargo Lamp Bulb Replacement

ID: 205024

Description: This guide shows how to remove and replace the...

Steps:

1. The lens cover has six plastic tabs that hold it in place.
2. The two rear tabs are larger and harder to unclip.

3. These tabs are very stiff. Take your time and be careful not to scratch the plastic. You may need to use a bit of force to unclip these.
4. Insert a metal spudger or a small flathead screwdriver into the front seam near the toggle switch.
5. Pry to release the front tabs.
6. Use a spudger or Jimmy to pry and release the side tabs.
7. Tilt and wiggle the lens cover until the rear tabs release.
8. Remove the lens cover and the gray cover plate behind it.

9. Pull the bulb out of its two clips and remove it.

10. Align and stack the lens cover and gray cover plate together
11. Insert the two larger rear tabs into their recesses.
12. Press the covers into place until all tabs click into place.