Dell Chromebook 11 3180 Screen Replacement

ID: 205964

Description: You may need to replace the screen in your Dell...

Steps:

1. Power off the Chromebook.
2. Identity where 4 Front Bezel Screws are located.
3. They are located on each corner of the Chromebook.
4. Use tweezer to remove the screw covers.

5. Identify where the hinge covers are located. Typically, they are located at the top of the keyboard.
6. Use tweezers to lightly pop them out.

7. With a 0" Phillips screwdriver, loosen and remove Front Bezel 5.00 mm screws that were exposed in Step 1.

8. Gently remove Front Bezel by lightly pulling Bezel out of place, starting from top corner, then going down to bottom corners.
9. If you remove it too quickly/not gently, the Front Bezel can snap and break.
10. Use tweezers to get between Front Bezel and Chromebook to make removal easier if needed.

11. Located the 5 small screws that keep the screen attached to Chromebook
12. There might be empty holes where the small screws could go. Please make note of placement of these screen screws in future Steps with installing new screen.
13. Using the tweezers, remove the 5, 3.00 mm screen screws.

14. Once screws are removed, gently place the loose screen face down on the keyboard.
15. Locate the screen connector.
16. Gently detach screen protector from old screen by lightly pulling them apart.
17. Replacing an original screen may void your Chromebook's warranty if you have one. Consult your Warrant Company or manual prior to removing.

18. Obtain new a screen and ensure that it is compatible with Chromebook.
19. Gently place the new screen face down on the keyboard.
20. Screen may be shattered if not handled with care.
21. Attach connector to insert on the screen by plugging in both ends together.

22. Line up the new screen in Chromebook metal frame how as previously with the old screen. Ensure all screw holes are aligned.
23. With a 0" Phillips Screwdriver, screw in the 5, 3.00 mm screws that were removed in Step 5 .

24. Place Front Bezel bordering the screen and lightly click into place.

25. Lightly push hinge covers back into place.

26. With a 0" Phillips Screwdriver, screw 5.00 mm Front Bezel screws back in.