iPhone 17 Pro Max Logic Board Removal

ID: 206402

Description:

Steps:

1. If your iPhone doesn't have mmWave functionality, you won't have this connector cover or cable. Skip the next two steps.
2. Use a tri-point Y000 screwdriver to remove the 1.0 mm‑long screw securing the mmWave antenna connector cover.

3. Use tweezers to unlatch and remove the mmWave connector cover.

4. Use the point of a spudger to pry up and disconnect the mmWave connector.

5. Carefully swing the logic board over the right edge of the iPhone.
6. Be careful not to strain the wireless charging cable still attached to the underside of the logic board.

7. Use a tri-point Y000 screwdriver to remove the 1.0 mm‑long screw securing the wireless charging connector cover.

8. Remove the wireless charging connector cover.

9. Use the point of a spudger to pry up and disconnect the wireless charging connector.

10. Remove the logic board from the iPhone.