iPhone 17 Pro Max Logic Board Installation

ID: 206406

Description:

Steps:

1. Use your finger to press and connect the wireless charging press connector to the logic board.

2. Tuck the wireless charging connector cover's tab into the lip on the logic board and lay it in place.

3. Use a tri-point Y000 screwdriver to install the 1.0 mm‑long wireless charging connector screw.

4. If your iPhone doesn't have mmWave functionality:
5. Carefully swing the logic board into the iPhone and rest it in place.
6. Skip the next three steps.
7. If your iPhone has mmWave functionality:
8. Carefully swing the logic board into the iPhone and angle it such that the mmWave cable can reach its logic board socket.

9. Use your finger to carefully align and press the mmWave antenna press connector onto the logic board.

10. Tuck the right end of the mmWave antenna connector cover under the lip next to the screw hole.

11. Use a tri-point Y000 screwdriver to install the 1.0 mm‑long mmWave antenna connector cover screw.