Opening the Copal 222 Flip Clock

ID: 206699

Description: For most repairs—such as replacing the neon...

Steps:

1. Unplug the power cord!
2. The two screws on the bottom of the device primarily hold a weight at the bottom in place. They should not be completely unscrewed to open the housing!
3. For your information, the weight is shown in image 2. It is sufficient if it is loosened slightly.

4. Pry the adjustment wheel on the right side off using a plastic opening tool.

5. Insert opening picks into the gap between the rear case and the front panel. Release the four clips.
6. The clips are highlighted in red in image 2 for your reference.

7. Pull the back housing with the clockwork off the front part toward the back.